This is an Insight article, written by a selected partner as part of WTR's co-published content. Read more on Insight
In India, the protection of industrial designs is governed by a dynamic legislative framework which is in sync with advances in technology and concomitant international developments. The Designs Act 2000, which repealed and replaced the Designs Act 1911, sets down the statutory framework for the protection of designs and has been in force since May 11 2001.
In India, the protection of industrial designs is governed by a dynamic legislative framework which is in sync with advances in technology and concomitant international developments. The Designs Act 2000, which repealed and replaced the Designs Act 1911, sets down the statutory framework for the protection of designs and has been in force since May 11 2001. The act not only provides for minimum standards of protection for industrial designs, as contemplated in the World Trade Organisation Agreement on Trade-Related Aspects of IP Rights (TRIPs), but also conforms to international trends in design administration. In conjunction with the Designs Rules 2001 (as amended in 2008), the act streamlines the procedural aspects of registering and processing design applications. India is also party to a number of international treaties which protect international designs, including the Paris Convention and TRIPs. Although India is not a signatory to the Locarno Agreement, the classification of articles to which a design is applied is based on the International Classification of Industrial Designs as per the agreement.
An unregistered design is not enforceable under the law, so a design must be registered in order to enjoy protection. However, it may be possible to protect a design under other legislation (see “Related rights” below).
Traditionally, Indian design protection has been based on copyright rather than patents. A ‘design’ has been defined statutorily to mean “features of shape, configuration, pattern or ornament or composition of lines or colour or combination thereof applied to any article whether two dimensional or three dimensional or in both forms, by any industrial process or means, whether manual, mechanical or chemical, separate or combined, which in the finished article appeal to and are judged solely by the eye”. This definition is exhaustive and all statutory requirements must be fulfilled by the feature in order to constitute a design under the act. The key requirement is the feature’s ability to appeal to the eye. This implies that the feature must be visible on the article and have aesthetic or artistic merit or visual appeal.
Often an article may have both aesthetic and functional features; in such cases, Indian legislation provides that “any mode or principle of construction or anything which is in substance a mere mechanical device” does not warrant design protection. Thus, if the features of the article are purely functional or the article’s appearance enhances its functional features, design protection is not possible. In addition, the feature must be applied to an article by an industrial process or means. Once all of these requirements are fulfilled, the feature may be called a design under the act and becomes eligible for registration, provided that:
- it is new or original;
- it has not been disclosed by prior publication or use or in any other way;
- it is sufficiently distinguishable from known designs or their combination; and
- it contains no scandalous or obscene matter and is not contrary to public order or morality.
Although the novelty requirement is absolute, the act provides an exception in the form of a six-month grace period in case of disclosure of the design before filing. The grace period is available only if:
- the design is disclosed, used or published in an exhibition notified by the government;
- the exhibitor exhibiting the design or article gives prior notice to the controller of designs; and
- the application for the design is filed within six months of the first exhibition of the design.
While the Indian Patent Office has four branches (in Chennai, Delhi, Kolkata and Mumbai), there is only one outpost of the Design Office, in Kolkata. Accordingly, design applications filed in the other three offices are sent to Kolkata. An electronic filing facility has also been introduced for the filing of new applications to register a design. All applicants or stakeholders can now file design applications online through the official portal of the Office of the Controller General of Patents, Designs and Trademarks (at www.ipindia.gov.in or www.ipindia.nic.in). The e-filing facility includes a comprehensive payment gateway which accepts electronic banking, as well as debit and credit cards. Users can also use their existing digital signatures (ie, the signatures used in trademarks and patents) for login and authentication purposes. Earlier this year, the Design Application Search Utility was also launched – this enables applicants to search for published design applications through a number of search inputs, such as application number, applicant’s name, state and country, date of filing, publication date and name of article. Before this, published design applications could be searched for on the basis of the application number only.
In order to file an application to register a design, the applicant must complete Form 1, which includes its full name, address, nationality, the name of the article, the class number and the address for service in India. The application may be signed by the applicant or its authorised agent. The following must accompany Form 1:
- a fee of:
- Rs1,000 (approximately $20) for a natural person;
- Rs2,000 (approximately $40) for a small entity; or
- Rs4,000 (approximately $60) for any other type of entity;
- four copies of the design;
- a brief statement of novelty endorsed on each copy;
- in case of a convention application, the priority documents; and
- if the application is filed by an agent, a power of attorney.
Number of designs allowed
If a particular design is to be registered for articles in different classes, separate applications must be filed. Further, a design may be registered for different embodiments, provided that a separate application is filed in India for each embodiment. The filing of multiple embodiments of the same article in a single application is not permissible under Indian law. In order to protect part of an article, each part must meet the requisite condition of “capable of being made and sold separately”. If part of the article is capable of being made and sold separately and can be judged solely by the eye, design protection can be obtained for such part. Design protection can also be claimed for a set of articles. Indian law defines a ‘set’ as “a number of articles of the same general character ordinarily sold together or intended to be used together, all bearing the same design, with or without modification insufficient to alter the character or substantially to affect the identity thereof”. Examples include furniture sets, tea sets and dinner sets.
There are no specific requirements regarding the number of drawings to be filed alongside an application. The rules provide that a design for which protection is sought should be represented exactly in drawings, photographs, tracings or other representations of the design. The representation should clearly show the details of elements of the design which are sought to be protected. In case of a claim for surface ornamentation, a photograph or computer graphic must be submitted. In order to claim the shape and configuration of an article, it is advisable to file all basic views of the article (ie, top and bottom, front and back, left and right side and perspective views).
The Indian Design Office conducts both procedural and substantive examinations. A novelty search is conducted in the database of earlier designs applied for, registered and published in India. The representations of the design are checked to ascertain whether they exhibit the claimed features of the design clearly. The examiners also examine the class of the article to which the design is applied and whether it is capable of being sold separately. If the design, as applied for, does not comply with any legal requirement, an office action is issued. Under current practice, an office action is issued around two to three months after the date of filing and the applicant must file its response to the office action within six months of the date of filing. This period can be extended by three months, provided that a prior application seeking such an extension is filed with the controller of designs. In exceptional cases, where it is not possible to show the design by way of representation, the Design Office may direct that a sample of the article be submitted.
The Design Office’s procedural objections to design applications usually comprise requests for an assignment document, power of attorney and/or certified copies of the priority documents. If the highlighted defects are not rectified, the applicant is heard in person. After the hearing, the controller decides whether the application should be accepted. The controller’s decision is communicated in writing to the applicant or its agent stating the reasons for the decision. The controller’s decision to refuse a design registration may be appealed to the High Court within three months of the controller’s decision.
Once examined and accepted, the design is registered in the Register of Designs and a certificate of registration is issued within three months of acceptance. Thereafter, the registration is published in the Official Journal. The term of protection for a registered design is 10 years from the date of the application and can be extended for a further five years upon payment of an extension fee.
There is no procedure to oppose registration of a design under Indian law. However, there is a cancellation procedure under which any interested person may file a petition for cancellation of a registered design at any time after registration of the design with the controller on one of the following grounds:
- The design has been previously registered in India;
- The design has been published in India or in any other country before the date of registration;
- The design is not a new or original design;
- The design is unregistrable under the act; or
- The design is not a ‘design’ as defined under Section 2(d) of the act.
On receipt of a petition for cancellation, the Design Office sends a copy of the petition and the evidence filed to the registered owner. Thereafter, the registered owner files a counterstatement and evidence at the Design Office and delivers a copy to the petitioner. After receipt of the counterstatement and evidence, the petitioner may file its reply statement and evidence by way of affidavit. A hearing is fixed and, after hearing the parties, the controller rules on the petition and issues an order.
The registered owner of a design enjoys the exclusive right to apply a design to the article in the class in which the design has been registered. A registered owner can file an infringement suit. A registered design in India can be enforced by way of a civil action. The remedies against infringement include interim and permanent injunctions, damages and a fixed penalty of up to Rs50,000 (approximately $820). A civil action enforcing a registered design can be filed before the district court where the defendant resides or carries on business or where infringement has taken place. In addition to using the defence of non-infringement, the infringer can use the defence of invalidity of the design on the grounds that the design lacks novelty, is indistinguishable from a known design or contains scandalous matter. If the defence of invalidity is used in a civil action, the district court no longer has jurisdiction and the suit is transferred to the high court with jurisdiction over that district court. Under the act, the registered owner of a design should mark the article with the word ‘Regd’ or ‘Registered’ and the registration number, except in cases of textile designs and articles made of charcoal dust. If the marking is missing, the owner is not entitled to claim damages. The Indian courts regularly deal with design infringement matters and a robust body of case law lays down the established legal principles.
Ownership changes and rights transfers
According to Indian design law, the right in a registered design can be transferred by way of assignment, agreement, transmission and licensing. Registration of title based on assignment must be filed with the Design Office within six months of execution of the assignment instrument. A further extension of six months can be sought. There is no way to extend this time beyond one year after the effective date of the instrument. The law also provides for the recordal of a licence, which must be done within six months of issue. Only a registered licence or a registered assignment in respect of a registered design is admissible as evidence before the courts or in any other proceeding, and therefore such instrument must be registered with the Design Office.
If an unregistered design has become distinctive due to long and continuous use, it may be protected under the common law tort of passing off. However, in order to claim passing off successfully, the design owner must establish that the design has become distinctive of the goods on which it is used through continuous use. While no specific use period is required to satisfy the acquired distinctiveness requirement, the use should be continuous and should make the design distinctive. Accordingly, the owner must be able to establish factually that the concerned design is associated exclusively with its article, and that use of a similar design would create confusion among the public.
In addition, copyright protection for a design may be claimed under the Copyright Act 1957 if the design was capable of being registered under the Designs Act, but was not registered. However, in such case protection is limited and expires once the design has been applied to more than 50 articles by an industrial process. Thereafter, the unregistered design has no statutory protection and is susceptible to copying. Thus, it is advisable to obtain design protection to ensure adequate and effective protection.
India has a well-defined and efficiently managed regulatory and institutional framework for the protection of industrial designs. Substantive criteria for protection have been prescribed and are in line with international standards. The procedural formalities are simple, time constrained and cost effective. However, applicants should follow the procedural requirements carefully, as around 90% of Indian design applications are rejected on procedural issues, while very few rejections are due to lack of fulfilment of substantive criteria. Thus, it is important to ensure that both the application form and the representation sheet comply with the guidelines so that design applications are processed speedily and efficiently.