This is an Insight article, written by a selected partner as part of WTR's co-published content. Read more on Insight

In Israel, the relevant national and international legislation is: the Patents and Designs Ordinance 1924; the Designs Regulations 1925; the Unjust Enrichment Law 1979; the Commercial Torts Law 1999; the Consumer Protection Law 1981; the Copyrights Law 2007; the Trademarks Regulations 1972; the Paris Convention for the Protection of Intellectual Property 1883; and the Agreement on Trade-Related Aspects of IP Rights 1994.

Legal framework

In Israel, the relevant national and international legislation is:

  • the Patents and Designs Ordinance 1924;
  • the Designs Regulations 1925;
  • the Unjust Enrichment Law 1979;
  • the Commercial Torts Law 1999;
  • the Consumer Protection Law 1981;
  • the Copyrights Law 2007;
  • the Trademarks Regulations 1972;
  • the Paris Convention for the Protection of Intellectual Property 1883; and
  • the Agreement on Trade-Related Aspects of IP Rights 1994.

At the time of writing, the Ministry of Justice is working on a new design law to replace the ordinance and regulations. While the Designs Bill proposes various amendments that would bring Israeli design law into line with EU legislation, the main change is a new option to protect unregistered designs according to a pre-determined set of criteria.

Unregistered designs

According to the Patents and Designs Ordinance and the Designs Regulations, there is no protection for unregistered design rights in Israel. However, the Supreme Court has granted protection to unregistered designs based on unjust enrichment (MCA 5768/94, 5614/95, 933/96, ASIR Import Export and Distribution Ltd v Accessories and Commodity Goods Forum Ltd, SIP 42(4) 289).

In addition, it may be possible to obtain protection for an unregistered design based on the tort of passing off. Passing off is established if there is proof that the product’s shape has gained goodwill in the market associated with the manufacturer and there is a likelihood of confusion as to the origin of the goods.

As indicated above, the Designs Bill may change the existing legal environment (in order to clarify it and strengthen public certainty as to the existence and scope of design protection) by allowing the protection of unregistered designs for three years (compared to a 15-year protection period for registered designs) and negating the use of the unjust enrichment cause of action.

Registered designs

Who can apply?

A design application can be filed by an individual, a number of individuals or a company. The application may be filed directly in the name of the owner. Indicating the designer’s name in the application is optional.

The examiner may also search and cite against a proposed application prior art that appears in the search results of foreign patent offices

What can and cannot be protected?

According to Section 2 of the Patents and Designs Ordinance, the definition of a ‘design’ is the lines, shape, pattern or decoration that is visually noticeable on the end product. A design may be registered with respect to any industrial product that has a shape, form or decoration which is dominantly visible in the final product.

No provisions in the regulations or ordinance deal with the treatment of spare parts. According to the ordinance, a design is granted for the unique shape or form of a product, which cannot be dictated by functional features. The shape and design of spare parts are generally dictated by their purpose and the requirement to ‘fit’ with the final product, and as such may not be protected under design law.

Therefore, whether spare parts can be protected by design law should be reviewed on a case-by-case basis.


The official fee for filing one application for one design in Israel is $125. The official fee for filing and registering one application for a set of articles bearing a common design is approximately $185.


Application process

In order to file and register a design in Israel, the design should be a novel and original design which was not previously published in Israel. A recent registrar’s circular, which was issued based on a court ruling, states that the design examiner may cite against the novelty of a requested design designs that have been publicly published online before the filing date of the requested design application or its priority date (if any). Therefore, the examiner may also search and cite against a proposed application prior art that appears in the search results of foreign patent offices.

A design application should include an article or product bearing one design, or a set of articles bearing one design. A ‘set of articles’ is defined as a similar group of items that are sold together or intended to be used together, and that bear an identical design.

A design application should include a set of drawings or computer-generated images in duplicate, depicting the article bearing the design from all angles, including a perspective view.

At present, there is no option to defer publication; however, the design itself is not published until two years after registration. That said, third parties may request a search with respect to registered designs that have not yet been published.

An original power of attorney is required, as well as a certified copy of a priority document (if applicable). The power of attorney and priority document may be filed within three months of issuance of a notice of missing parts. Extensions of time are available, on payment of official fees.

Electronic filing is not available in Israel; however, this feature is currently under development with the Patent Office and may become available in the upcoming year.

Examinations and appeals procedure

Upon filing, the application undergoes a procedural examination within a few weeks and the Patent Office subsequently issues a filing receipt. If there are any missing documents or incomplete information, the Patent Office will issue, together with the filing receipt, a notice of missing parts requesting the relevant documentation/information.

The application will undergo substantial examination within 12 to 15 months of the filing date. If an office action is issued, it must be responded to within three months. Extensions of time are available on payment of official fees.

Costs are subject to caps set by regulation and rarely amount to more than 25% of the actual legal fees incurred


Once the examination stage is concluded, the examiner will issue a notice of allowance and the application will proceed to registration. A certificate of registration is then issued. Until recently, a publication fee had to be paid, but this requirement was revoked in June 2014.

The application is valid for five years from the application date and may be renewed for two additional five-year terms, up to 15 years in total.

The registered design is published two years after the date of registration.


No oppositions are available.

Removal from register

A third party may file a cancellation request with the Patent Office against a registered design at any time on the grounds that the design was published before its filing date. The party requesting cancellation bears the burden of proving that the design was previously published. Cancellation is also possible in case of a typographical error. Any other attempt to cancel or revoke a design must be filed with the district court.


Design infringement litigation generally follows the basic procedures of general Israeli litigation. On average, a design infringement case takes between one and three years. This does not include appeals, which may take between one and two years. Claims relating to designs are generally filed with the district courts. However, if the monetary value of the disputed goods is relatively low and there is no request for injunctive relief, the claim should be filed with a magistrates court. Appeals against magistrates court decisions are filed with the district courts. District court decisions may be appealed to the Supreme Court.


A preliminary injunction is the most common remedy granted to the owner of a registered IP right, while unregistered IP rights (eg, an unregistered design) usually will not enjoy interim protection. A preliminary injunction may be issued if the rights holder can provide proof of cause, demonstrate to the court the urgency of the matter at hand and provide a bank guarantee. The court usually holds a comprehensive hearing to consider the case at hand. Similarly, permanent injunctions may be granted within the framework of the lawsuit.

An Anton Piller order is a seizure order under which the court empowers a party (usually the plaintiff) to enter the premises of a third party to search for and seize evidence (usually of infringement).

Monetary damages awards are relatively small compared to those available in other Organisation for Economic Cooperation and Development member states. An award of damages generally requires proof of infringement and damages, or at least a reasonable estimate. In assessing the amount of monetary damages, a court may require the plaintiff to prove actual damages. However, the court’s final award will not necessarily be bound by the proof of actual damages provided by the plaintiff.

The courts routinely award damages without having to prove actual damages, based on the Commercial Torts Law. According to this law, compensation may be awarded without having to prove actual damages. However, this type of compensation is limited to NIS100,000 (approximately $26,000) per infringement.

The court may order the defendant to provide the plaintiff with a complete audit of its accounts with respect to its infringing activities.

The courts generally award expenses to the prevailing party in litigation. However, costs are subject to caps set by regulation and rarely amount to more than 25% of the actual legal fees incurred.

A design owner may also demand that the infringer transfer the infringing goods to it or destroy all of the infringing goods.


As in other civil matters, there is no set timeframe for the resolution of an enforcement action for either registered or unregistered rights. However, while civil litigation in Israel can sometimes be resolved within one year, it usually extends to two or three years, and in extenuating circumstances can even take four years (excluding appeal proceedings).

Ownership changes and rights transfers

Design rights may be assigned, transferred, licensed, subjected to lien or conveyed via any other lawful provision. In order to record an assignment with the Patent Office, an originally signed assignment or a certified copy thereof signed by the assignor is required. If the owner is represented by an agent, a suitable power of attorney on behalf of the assignee is required.

In order to record a licensee, an original or certified copy of the licence agreement is required for filing. An original power of attorney signed by the licensee is also required for filing.

Related rights

There may be some overlap between design rights and trademark rights with respect to three-dimensional (3D) trademarks filed for actual products or their packaging.

Generally, a product or its packaging is protected by design law and/or patent law, depending on the type of protection sought. However, if certain criteria are fulfilled, 3D marks may be accepted for registration and subsequently protected under trademark law.

The 2003 Supreme Court ruling in August Storck KG v Alfa Intuit Food Products Ltd, which dealt with 3D trademarks, comprehensively addressed the issue of whether 3D images should be protected under trademark law, as opposed to design or patent law. The ruling distinguished between:

  • 3D trademarks that function merely as trademarks in commerce;
  • 3D trademarks that depict the actual product; and
  • 3D trademarks that depict the packaging of a product.

The decision set down specific criteria that would allow for the registration of each version as a 3D trademark, including use as a trademark, establishment of secondary meaning, lack of aesthetic/functional character and unique nature.

However, even if these criteria are met, there is no guarantee that the registrar will allow the registration of a 3D trademark and additional concerns may be taken into consideration. Each case is different and is reviewed on its own merits, since the registration of such marks affords, on the fulfilment of certain requirements, unlimited protection and a monopoly which may affect future market competition.

In a registrar’s decision dealing with a trademark application for a 3D image of the CROCS product for shoes, the registrar agreed to allow registration, concluding that the mark had acquired distinctive character and lacked functional purpose.

However, such an application can be granted only in unique circumstances. Many other 3D applications for packaging, including the Head & Shoulders shampoo bottle, have been refused.


Pearl Cohen Zedek Latzer Baratz

5 Shenkar Street

PO Box 12704

Herzliya 6473339


Tel +972 9 972 8000

Fax +972 9 972 8001




Dor Cohen-Zedek

Senior partner

[email protected]


Dor Cohen-Zedek is a senior partner with Pearl Cohen Zedek Latzer Baratz, one of the leading IP firms in Israel. Ms Cohen-Zedek, a third-generation IP lawyer, is admitted to practise in Israel and New York. She heads the firm’s Israeli trademark and design group, advises on worldwide trademark/design strategy and handles trademark and design prosecution and litigation. Ms Cohen-Zedek is a member of the International Trademark Association, the International Association for the Protection of Intellectual Property, the Pharmaceutical Trademarks Group, the European Communities Trademark Association and MARQUES.


Liora Ghelfand


[email protected]


Liora Ghelfand is an attorney in the trademark and design group at Pearl Cohen Zedek Latzer Baratz and is admitted to practise in Israel. Ms Ghelfand has more than 10 years’ experience and knowledge of Israeli and foreign trademarks, patents and designs, and prosecution procedure, although her main focus is on foreign and Israeli designs.


Unlock unlimited access to all WTR content